A new proportional solenoid with hi - directional operation was presented to deal with the uni - directional low driving performance of conventional proportional solenoid , which worked on differential control of magnetic fields produced by permanent magnet and control coils 摘要針對傳統比例電磁鐵僅具備單向驅動能力的不足,提出了一種耐高壓具有雙向驅動能力的比例電磁鐵。
The silicon controlled trigger and it s auxiliary circuit could regulate simultaneously the controlling coil current of four series - parallel connected powers , so the purpose of making four powers output in step with was achieved , and the process of increasing progressively current after lighting arc and weakening current after going out arc was realized 利用可控硅觸發器及輔助電路可以同時調節串并聯在一起的四臺電源控制線圈的電流,達到四臺電源同步輸出的目的,并且實現了等離子弧噴涂引弧時電流遞增和熄弧時電流衰減的過程。
The bias magnetic field of the bias coil driven by bias current and small signal test current , results in the induced signal of the control coil . the terminal voltage of the control coil is detected by the test circuit . then the signal containing the information of rotor displacement is obtained , from which we can get the dc voltage signal proportional to the rotor displacement through half - wave rectification circuit and low pass circuit . this dc signal is put into a pid controller to get the control signal of the rotor displacement 偏置測試電路向偏置線圈輸入偏置電流和小信號測試電流,兩者產生的偏置磁場在控制線圈產生感應信號,檢測電路檢測控制線圈端電壓并提取含有轉子位移信息的電壓信號,該信號經半波整流電路和低通濾波電路后得到與轉子位移成正比例的直流信號,再由pid控制器轉換為轉子位移的控制信號,最后控制信號輸入功放電路產生控制電流,實現閉環控制。