Technical norm for error of measurements and interpretation of data 測量誤差及數據處理技術規范
Absolute error of measurement 測量的絕對誤差
Analyzing and modeling of the compensation error of measurement delay in active power filters 有源電力濾波器檢測滯后補償誤差的分析與建模
It brought forward some methods to reduce error of measurement by analyzing whether surface was inclined or not 并重點分析了物面傾斜對測量結果產生的影響,提出了解決方案。
According to the allowance of production, the maximum error of measurement is used to determine the accuracy of the instrument 根據生產所允許的最大測量誤差來確定儀表的精確度。
Abstract : some reasons which influence the accuracy of measurement of 3d measuring machine and methods for eliminating the error of measurement are presented in this paper 文摘:介紹了影響三坐標測量機測量精度的一些原因以及消除測量誤差的方法。
But in a great many situations, if you have no regard for the small resistance, that will bring the errors of measurement, so we have to erase the effect of the small resistance 但在許多場合下如果忽略電路中存在的小電阻,將會帶來測量結果的不準確,此時必須消除小電阻影響。
It is analyzed that measurement error which influences the reliable degree of measurement on the system . it is given that error formula estimated on the measuring method used in the system, and imitating estimation is achieved on this error of measurement method through computer 同時對影響系統測量準確度的原因進行了定性和定量的分析,給出了本系統測量方法的誤差估計公式,測試結果表明本系統測量誤差遠遠小于0.02的予期指標。
High-performance isolation power supply, magnetism isolation chip and photoelectricity coupler are employed to accomplish high-speed transmission for data, which improve the noise restraint and electric isolation . in addition, the error of measurement of the universal counter is analyzed in this thesis 使用了高性能的隔離電源、磁隔離芯片和光電耦合器,實現了對計數器的完全隔離,起到了很好的抗干擾效果和電氣隔離作用,可以實現數據高速傳播。