multiframe中文什么意思

發音:

用"multiframe"造句

多幀
復幀

multiframe signalling: 復幀信令，多幀信令
multiframe structure: 復幀結構
electro-optical multiframe camera: 光電多幅照相機
lma loss of multiframe alignment: 多幀失步; 多幀校準損耗
loss of multiframe lom: 復幀丟失

下載手機詞典可隨時隨地查詞查翻譯

例句與用法

更多例句：下一頁

Trail trace identifier multiframe
路徑蹤跡識別復幀
The advantage of the multiframe message model is that it allows rich messages to be exchanged between communicating applications
多幀消息模式的優點在于：它允許在通信應用程序之間交換內容豐富的消息。
It ' s the aim for many pepole to improve the image resolution . one of the proper approaches to the aim is the siginal processing based methods in software . it can recover the high resolution image from multiframe undersampled images
提高遙感影像的分辨率一直是人們追求的目標，實現這一目標的有效途徑之一便是采用基于信號處理的軟件方法，其基本原理是應用同一地區多幅重復觀測影像之間的互補信息，用超分辨率重建算法恢復高分辨率圖像。
Qe1 achieve the whole synchronization by software and hardware . during the course of the initialization of the qe1 system , the chip pm4354 can accomplish the task of synchronization of bit , frame and multiframe after the chip initialization by the software . after pm4354 accomplishes the bit synchronization , qel will read the status registers of the pm4354 to get the status of each el circuit and choose recovered clock of the specified the el circuit as the external timing source of the whole htc - 5200an equipment
Qe1系統在系統初始化時，通過軟件完成對硬件芯片pm4354的初始化工作后，便可利用該芯片完成4路e1的同步(位同步、幀同步和復幀同步) ；在pm4354完成時鐘提取的任務后， qe1通過不斷地訪問pm4354的狀態寄存器，獲得每路e1的狀態信息，在時鐘源的選擇原則下，選擇指定e1線路的恢復時鐘作為整個htc - 5200an節點設備的外部參考時鐘，從而解決了htc 5200an的中繼板卡由e1變?yōu)閝e時所帶來的網同步時鐘源。
In pon , the transmission of downlink signal from olt to onu is not complex . usually , the information destined for onus are combined into a multiframe at olt via tdm before reaching the feeder fiber , and then broadcast to each onu via the passive optical demultiplexor . upon receiving the downlink multiframe signal , each onu takes out the part of information for itself only
在無源光網絡中， olt到onu的下行信號的傳輸過程較為簡單，一般在olt將需要發送到各onu的信息采用時分復用的方式組成復幀送到饋線光纖，通過無源光分路器以廣播的方式發送到每一個onu ， onu收到下行復幀信號后分別取出屬于自己的那一部分信息。