however flux leakage is really exist, calculation through formular analytic method has more error, so electromagnetic field analysis is made by using finite element method ( fem ) in ansys7.1 / multiphysics and ansys / emag programs . typical quantities of interest in a magnetic analysis are available such as magnetic flux density, magnetic field intensity, magnetic forces, power loss and flux leakage in the system of magnetic levitation . then gain the current in the coil which control levitation gap when the stage is stable 由于存在漏磁,用公式的解析法計算有很大的誤差,因此本文采用有限元法(fem)來計算磁懸浮系統磁場分布,從而計算磁力,通過用ansys7.1軟件進行有限元電磁場分析計算,得到平臺穩定懸浮時電磁線圈所需電流、懸浮氣隙等控制參數,由于設計的磁懸浮系統為非軸對稱結構,采用2d磁場分析有一定的誤差,而采用3d電磁場分析更接近實際。
based on g-w contact model, two rough surfaces in contact were simplified to a smooth one and a rough one which has regular rectangular asperities, and a three-dimensional transient thermal and stress coupled fem model was established using thermal-structure sequential coupling . the course of the sliding with friction was simulated using the nonlinear multiphysics field fem, meanwhile considering thermal-elastic problems of the two bodies, to calculate and analyze the temperature, contact pressure and stress of the sliding contact surfaces with frictional heating 基于g-w接觸模型,將兩個粗糙表面簡化為一個有規則排列的長方體微凸體的粗糙表面與一光滑表面,利用熱結構順序耦合建立三維瞬態有限元計算模型,考慮兩個物體摩擦接觸的熱彈性問題,采用非線性有限元多物理場來實現,對粗糙表面接觸模型的瞬時摩擦溫度場、壓力場和應力場進行了計算分析。