Two novel preionization technologies are presented . one is " multi - segmented coaxial pulsed - preionization " 第一種技術稱為“縱向多段脈沖預電離“技術。
A number of metal cirque electrodes surround equidistantly outside the glass discharge tube , acting as preionization electrodes 在玻璃放電管的外表面緊密套上若干圓環形電極,作為預電離電極。
In contrast to pulsed discharge without preionization , the working voltage of the laser falls about 20 % and the electro - optical efficiency is improved approximately 30 % 和無預電離的脈沖放電相比,激光器的工作電壓下降了大約20 ,電光轉換效率提高了大約30 。
Another is " helical transverse - pulsed preionization " . two comparatively parallel copper foil strips surround helically outside the glass discharge tube , acting as preionization electrodes 在玻璃放電管的外表面螺旋地粘上兩條相對平行的金屬箔,作為預電離電極。
Finally , based on the theoretical and experimental studies above , we bring forward two new schemes of pulsed - preionization slab co : laser with diffusive cooling 最后,在前述理論和實驗的基礎上,提出了兩種新型的脈沖預電離擴散冷卻板條co _ 2激光器方案,進行了可行性研究。
This paper also presents a theoretical analyzing method for the instantaneous simulation of pulsed - preionization discharge by using pspice software , it is favorable to the optimal design of the laser discharge circuit 獲得的最大的電光轉換效率達19 。本文還發展了一種采用pspice軟件對脈沖預電離放電進行瞬態模擬的理論分析方法,有利于激光器放電電路的優化設計。
Non - selfsustained longitudinal discharge co2 laser employing helical transverse - pulsed preionization technology is investigated for the first time . the main discharge and output power are well controlled by the pre - ionization pulser 采用螺旋結構橫向脈沖預電離技術首次研究了非自持縱向放電co _ 2激光器,非自持激光器的主放電和輸出功率由外加的預電離脈沖控制,激光器的可控性非常好。
In this dissertation the operation mechanism of pulsed - preionization diffusive cooling co _ 2 , laser is studied . pulsed preionization technology is put forward to improve the stability of discharge , decrease the operating voltage , and enhance the electro - optical efficiency 本文研究了脈沖預電離的擴散冷卻co _ 2激光器的運轉機理,提出采用脈沖預電離技術改善縱向脈沖放電的穩定性、降低工作電壓和提高電光轉換效率。
Firstly , the paper discusses the characters , principles of excimer laser , and study on pulse discharge process . secondly , for the purpose of designing excimer laser , i spent a lot of time to researsh and finish electrode designing , reducing circuit inductance , spark gap designing , ns discharge , uv preionization , glow discharge 本論文首先對準分子激光特點,原理,脈沖放電進行了評述,其次,以試制xecl準分子激光器為目的,探索并完成了電極設計、回路電感減小方法、火花開關設計、 ns陡前沿放電、紫外預電離、輝光放電、脈沖功率技術研究。