sample n. 1.樣品,貨樣。 2.標本;榜樣,實例。 3.【統計】典型取樣,抽檢查。 4.【電訊】信號瞬時值。 5.【冶金】 〔 pl. 〕 鋅華。 That is a fair sample of his manners. 那就是他的典型態度。 a light sample 光脈沖。 up to sample 1. 和樣品一樣[相符]。 2. 可以接受的,可以同意的。 vt. 從…取樣,從…抽樣;提供;貨樣;對…進行抽樣檢查。
Automatic gas sample injection module 氣樣自動注射組件
Automatic gas sample injection 氣樣自動注射
Sample injection valve 試樣注射閥
The gas sensor array testing system comprises the automated flow - injection apparatus , the data acquisition device and the pc software . sample injection and data acquisition are realized automatically through real time pc control . thereby it assures the reproducibility and reliability of testing 研制成功的氣體傳感器陣列智能測試系統由計算機實時控制,可以實現測試氣體的自動進樣和數據采集與處理,提高了測試的重復性和可靠性。
As the key of the sample injection , a digital control instrument of mass flow controller ( mfc ) , which can work in online and offline mode , was designed . it can give 4 flow signals accurately at the same time . the concentration and flux of the sample gas can be set by the instrument software 進樣裝置的核心是自行設計開發的新型流量控制儀,該儀器采用數字接口,可以以聯機和脫機方式工作,能夠同時快速準確地輸出4路流量控制信號,對測試氣體的流量和濃度進行設定。
A mixture of three amino acids ( arg , gly , glu ) labeled with fluorescein isothiocyanate ( fitc ) was separated in pdms microfluidic chip , the separation voltage is 200v / cm , the separation time is less than 120 seconds ; according to ccd fluorescence images , two distinct physical processes - stacking and destacking during sample injection were studied qualitatively ; rhodamine b , a kind of temperature - dependent fluorescence dye , was used as probe to develop a temperature - fluorescence intensity equation , then temperature - color map in microchannels was constructed , and temperature trait in microchannels on the pdms microfluidic chip was analysed . according to the results , we conclude that the electric field applied to the pdms microfluidic chip should not exceed 400v / cm 利用pdms微流控芯片對fitc標記的精氨酸、甘氨酸、谷氨酸混合物進行了電泳分離,分離電壓為200v cm ,分離時間不到120秒;通過拍到的熒光顯微圖像對電泳注樣過程中復雜的樣品分子積聚與解聚現象作定性的分析;以熒光染料rhodamineb為溫度熒光探針,建立了pdms微流控芯片上的溫度-熒光強度的關系公式,并利用matlab圖像處理工具箱構建出微流體溝道內的溫度色圖,對pdms微流控芯片的微流道溫度特性進行了分析,根據實驗結果,我們認為對于pdms微流控芯片來說,在進行需要外加電場作用的試驗時,外加電場不應超過400v cm 。