Calibrating methods of rock treaxial testing apparatus 巖石三軸試驗儀校驗方法
Calibrating methods of measurement instrument of rock 巖石變形測試儀校驗方法
Calibrating methods of sonic parameter measuring apparatus 巖石聲波參數測試儀校驗方法
Calibrating method of camera in opto - electronic system 船用光電系統中攝像機參數的標定方法
Density standard calibrating method 密度基準定度法
Application of the griddedparallelline calibrating method in tubing thread metrology “網格式平行線法”在螺紋參數測量中的應用
6 . the testing and calibrating method is studied and the testing result is analyzed 6 、進行了傳感器的測試和標定技術研究,并對測試結果進行了分析和討論。
And the calibrating method being used nowadays can not meet the specific needs , because the operation is complex , and the calibration precision is low 由于其工作環境特殊,現有的各種精密測角方法都不適用。目前采用的標定方法操作復雜,校準精度較低,不能滿足要求。
In the height - calibrating method , after the calibration board is moved twice , the calibration matrix can be got from the relationship between the phase and the height of the calibration board 通過移動標定平面到兩個不同位置,得到標定位置處的光柵圖像,根據平面間的相位差和高度差得到高度標定矩陣。
Curves in actual production , such as hole diameter , bed thickness , mud invasion , shale content , electrofiltration potential , etc . are analyzed . correspondent calibrating methods are proposed 對影響自然電位曲線的各種因素井徑層厚泥漿侵入泥質含量過濾電位等進行了分析,并對其影響因素提出了校正方法。